Seite 1 von 1

Fitting URS4 Shocks to Audi 100 QT

Verfasst: 22.07.2010, 14:41
von lcsmith
Hi,

I'm wondering if the HP2 Brakes & Shocks from my URS4 (K reg/1993 ) would fit my Audi 100 Quattro Turbo ( Reg H / 1990 ).
Is it a striaght swap ?

Thanks,
Leigh

Re: Fitting URS4 Shocks to Audi 100 QT

Verfasst: 23.07.2010, 07:39
von Mario20v
Check the pin of the Suspensionarm first.
The S4 has 19mm and if the 100 has 19mm or 18mm is pending from the options.
I am not sure about the tooth system from the drive shaft if there is something changed,
to fit in the hub between the cars.
Same thing with the ABS Sensor, could be plugged or monted with a screw.
But the rest should be a straight swap.